Archive for the ‘Tech’ Category
Hoverboards are the ultimate dream of any teenager. From the early 85’s through the blockbuster ’’back to the future’’, hoverboards were introduced to us and since then they have made us crazy. Not only children, but people of every age have desired this hover board. Everyone thinks that hoverboards can only be seen in science fiction and dreams, but in the 21st century through many modern gadgets you can mend your own hover board. Undoubtedly it wouldn’t reach near the ones which was shown in ‘’back to the future’’ but still they will surely prove to be cool. For any further information on hover boards or on how to make one, visit this website.
For many years everyone has admired a hoverboard. Once in the 90’s there was a rumour that in reality hoverboards are being made, and that rumour alone increased the heart beat of nearly every single earthling. Actually building a hoverboard is not that difficult. All you need is some money, few electronic devices, and lots of patience and determination and a little bit of guidance which the following points will provide:-
- It is often said ‘’the better the root of the tree is, the better is the tree’’, so at first you need to make the main body of the board. For that purpose use a wooden piece of board. If you can find then you may use any other replaceable light and long lasting material. Try to avoid plastic as they won’t last longer and ruin both your board and hard work completely.
- Now to make this board levitate you surely can’t use the methods which are shown in the film, so use leaf blowers instead. You will need around four of them. Two for the bottom, one at the top and the last one for the thruster. Now as you are just making the basic model so you should try to avoid the fancy stuffs.
- Next step is the most difficult one. You have to add or eliminate the leaf blowers accordingly. Remember one thing that the success of the leaf blowers solely depends on your weight. So add or eliminate them accordingly. As the main purpose of the board is to levitate, so you will need at least two leaf blowers at the bottom, and to balance the device fix one at the top.
- Now as you have fixed two blowers at the bottom and one in the top, now it’s time for the final blower. Install it to the back end of the board. This one will be used to navigate the board.
If all the given steps are followed, then making a hoverboard will be a piece of cake. You may still think that is it possible to make a hoverboard? And to find the answer try making one. Almost every teenager is trying to make their hoverboard and many of them have successfully made it. So now it is your time to make one and enjoy.
Today, tethering from mobile devices is becoming very popular among many smart phone users. A lot of people are using different tethering such as Bluetooth tethering and Wi-Fi tethering for sharing many things with other computers, mobiles, laptops, or tablets. Most of the smart mobile users are willing to use the Wi-Fi tethering technology to share their data plans with the other computer or mobile devices. This is increasingly used in the android devices supporting 3G or 4G networks. This Wi-Fi tethering feature of the smart phone helps to create a unique Wi-Fi hotspot within a particular range. The people can create own wireless fidelity range anytime and anywhere using this Wi-Fi tethering benefit. With this feature of tethering, their mobile will be acting as the Wi-Fi network hotspot. Other computer or mobile devices within the range of this hotspot can connect to the internet using this wireless fidelity connection.
The smart phone users can make Wi-Fi hotspot if they have any data plans in their sim cards. They can have an excellent option of sharing their sim data plan with the other mobile or computer devices through the help of this Wi-Fi tethering feature. If the users want wired connection instead of wireless connection, they can also make use of the usb tethering for wired connection to the personal computers. Security is very serious aspect in making connection with the hotspots. When it comes to wireless tethering, the smart phone users should only use trusted hotspot and reliable website to avoid several attacks. Instead of laptop or computer device, the people can make use of the mobile phones for the fast access of internet through the Wi-Fi hotspot. The Wi-Fi android devices will slowly become as the best alternative Wi-Fi hotspot for the smart phone users to share their data plans with other users.
When tablet PCs came on board, everyone was looking out for them. Unfortunately, their initial number was not adequate to meet the demand of the customers. During those days, it was usually unnecessary to pay particular interest to the functions of the product. This can be attributed to the point that most people were interested in the marked difference between a tablet PC and a computer. Moreover, the number of tabs was also not adequate to make any notable debates on features. However, the story has changed today. Many tabs with a wide range of functions have come to existence. This has made the necessity of comparing the features. As a result, it is becoming increasingly challenging to buy a tablet PC with the best functions. If you are in such a situation, the information in this article will prove to be helpful to you.
First of all, you must pay particular interest to the storage space capacity of the product. Although this is personal and usually depends on the storage space needs of the owner, a huge storage space is usually suitable. Therefore, you need to look for a system whose storage space capacity is as huge as possible. If the size of the storage space is of less importance to you, you can settle for any reasonable storage space size. But, you have to remember the point that you may need the storage space of the product for the storage of a wide range of files in the future. The random access memory or RAM has a huge bearing on the efficiency of any system. In the same way, the performance of a tablet is closely related to the size of its RAM. A large ram is always suitable because it enhances performance. If any other factors such as the presence of corrupt files and the lack of storage space are neglected, all tabs with large RAMs are associated with high performance.
Embedded systems are not a new commodity in modern society; they are found in a variety of common household products and everyday electronics, including cell phones, printers, and more. Additionally, these systems are usually intended for a specific, singular role, making them ideal for mass production and engineers. However, ruggedized embedded systems have become a highly sought after source of strength and production.
With low costs and high resistance, these embedded systems can be found in military settings, medical rooms, laboratories, and more, becoming helpful and essential to the process. Even so, a software engineer in his own home could find advantage in a ruggedized embedded system amidst a ready-made computer board complete with the necessary components to create a computerized system is a much more cost effective route to obtaining an integrated system still highly capable of software development. Though embedded systems are defined primarily by their focus on a single task, these embedded systems can be implemented with other circuits and designs to become another powerful piece of technology.
Further, ruggedized embedded systems, as the term ruggedized suggests, are designed to be highly tolerant to any surrounding conditions in the environment, and are thus ideal for areas with extreme temperatures, humidity, and more. In places like laboratories where temperatures are kept low and facilities kept sterile, ruggedized embedded systems are all the more ideal where the usual, commercial grade computer system may not be able to function.
With other features to withstand shock and vibrations, these systems become excellent choices for harsher conditions, becoming useful especially in areas of varying climates and even on the battlefield. With various protective options, these ruggedized embedded systems are easy to maneuver and suitable for any work environment, an excellent choice for those searching for an embedded system that is reliable and secure.
Back in the Nineteen-eighties when the first smart calculator was marketed, it was recognized to be the thing to own. The same was the situation when first smartphones were launched. Nowadays, everybody has smartphones in their pouches. What individuals do not have is a watch-phone. Just like smartphones, Android OS seems to control the watch-phone industry as well. Yes, these gadgets are the new in factor today and organizations are using the demand by production of new stylish and smooth looking watch-phones that well, look charming to say the least. The watch-phone has been in the news a lot lately. You have often observed of its functions, you have heard of its opinions and you have often observed about its abilities from that tech-crazy buddy of yours. Now you might be thinking whether to buy it or not. After all, how do you know how much of the compliment it has obtained is true? We create your job simple – here we separate the wheat from the chaff and tell you some things why we think you want – no, delay, need – a watch-phone.
1. Well it’s not just a watch-phone. You can actually use it as a practical cellphone. To use it as cellphone, you can either couple it with a wireless device or you can use it hands-free, too, because it has built-in speakers as well as mics. To top it all off, it has a talk-time of over five hours and a five days of stand by time.
2. Next, it has a camera. Yes, not only does the watch-phone function as a watch but actually allows you call with a significant talk-time and stand-by time. What’s more, you can just click images too.